This page is frozen, actual one here.

Service procedures library

Name:	LibServProc
Version:	1.0.0
State:	Free (GPL)
Author:	Roman Savochenko
Description:	Library of service procedures for different using.
Address:	DB in file: SQLite.LibDB.servProc (oscadalibs.db.gz)
Compatibility:	OpenSCADA >= 0.9

About the library

The library created to different using and it is wrote on JavaLikeCalc language.

To addressing the functions of the library you can use static call address "DAQ.JavaLikeCalc.lib_techApp.{Func}()" or dynamic "SYS.DAQ.JavaLikeCalc["lib_techApp"]["{Func}"].call()", "SYS.DAQ.JavaLikeCalc["lib_techApp"].{Func}()". Where {Func} — function identifier in the library.

To connect the library to the project of the OpenSCADA station it is possible by downloading the attached file of the database, placing it in in the database directory of the station's project and creating the database object for the DB module "SQLite", indicating the database file in the configuration.

1. TEST: FS archiver pack (archPackFStests)

Description: Archiving to File System tests pack, for check the optimization algorithm. The stages supported:

• Stage 0: Main values fill: "1,1,10,10,100,100,1000,1000,10000,10000,EVAL"
• Stage 1: Change to different value 20: "1,1,20,10,100,100,1000,1000,10000,10000,EVAL"
• Stage 2: Set value for merge, equal, to up 10: "1,1,20,10,10,100,1000,1000,10000,10000,EVAL"
• Stage 3: Set value for merge, equal, to down 1000: "1,1,20,10,10,1000,1000,1000,10000,10000,EVAL"
• Stage 4: Set different value to end 20000: "1,1,20,10,10,1000,1000,1000,10000,10000,20000,EVAL"
• Stage 5: Change end value for merge to up 10000: "1,1,20,10,10,1000,1000,1000,10000,10000,10000,EVAL"
• Stage 6: Set value to end for merge to up 10000: "1,1,20,10,10,1000,1000,1000,10000,10000,10000,10000,EVAL"
• Stage 7: Set to end value EVAL: "1,1,20,10,10,1000,1000,1000,10000,10000,10000,EVAL"
• Stage 8: Set equal value to insert 10000: "1,1,20,10,10,1000,1000,1000,10000,10000,10000,EVAL"

Author: Roman Savochenko
Version: 1.0.0
Parameters:

2. TEST: Release (releaseTests)

Description: OpenSCADA releases formal sets pack in list:

• 0:System
• 1:Security User/Group tests
• 2:Transport subsystem tests
• 3:Archive subsystem tests
• 4:DB subsystem tests
• 5:Protocol subsystem tests
• 6:DAQ subsystem tests
• 7:UI subsystem tests
• 8:Special subsystem tests

Author: Roman Savochenko
Version: 1.0.0
Parameters:

3. CRC 16 (crc16)

Description: Standard Cyclic Redundancy Check (CRC) with free polynomial set, by default it is 0x8005. It isn't actual more by the common CRC implementing.
Author: Roman Savochenko
Version: 1.0.0
Parameters:

4. Archives recalc (procArh)

Description: Value archives recalculation.
Author: Roman Savochenko
Version: 1.0.0
Parameters: